Thermo Sensors
Rajendra Nagar, Hingna Road, Nagpur, Maharashtra
GST No. 27AWVPS5974N1Z3
TrustSEAL Verified
Call 0804763193787% Response Rate
SEND EMAIL
Product Details:
| Type | PT100 |
| Temperature Range | -200 to 600 deg C |
| Accuracy | Class A |
| Sensor Connection Wiring | 3 Wire |
| Brand | THERMO SENSORS |
| Probe Diameter | 0.5 - 8 mm |
| Probe Length | 0 - 150 mm |
| Sensor Configuration | Simplex |
| Material Grade | SS316 |
| Usage | Industrial |
| Theory | Temperature Sensor |
Product Details:
| Type | PT100 |
| Accuracy | Class A |
| Probe Material | Glass Fiber |
| LENGTH. | 150MM |
| DIAMINTION | 8MMX150MMX2MMX2MT CABLE |
| MAKE | THERMO SENSORS |
Simplex (Single element) stator winding RTDs The Stator winding temperature detector (RTD) are used to measure winding temperature of large Motors, Generators etc. These sensor are sandwiched between the windings of Motors/Generators. Unlike on/off devices, It allows continuous measurement of winding temperature. Normally six sensors are recommended for each motor, Two per Phase. This RTD are generally flat type in construction and are available in various sizes.
Specification:
Type : PT 100(100 ohm at 0 degC)
Model: TSRE series Body
Material: Fibre Glass epoxy
Temperature Class: Class F(Temperature limit:155 DegC) or Class H(Temperature limit:180 DegC)
Calibration Standard: IEC 60751 Or DIN 43760
Temperature coefficient(TCR):0.003850
Accuracy: Class A/B/2B
Sensing current: 10mA maximum
Dielectric strength: 3 KV/50Hz for 1minute between leads & surface of Glass epoxy body (Increased dielectric strength up to 5 KV/ 50Hz for 1 minute upon request.)
Product Details:
| Type | RTD Sensor |
| Accuracy | +/-1.5C |
| Theory | Resistance Thermometer |
| Usage | Industrial |
| Brand | Thermo Sensor |
Product Details:
| Sensing Distance | 20 mm |
| Sensor Type | Inductive |
| Model Name/Number | GLV18-8-450/115/120 |
| Usage | Diffuse mode sensor |
| Material | PBT plastic |
| Brand | Pepperl Fuchs |
| Voltage | 110 V |
| Working Temperature | -25~+65 Degree C |
Product Details:
| Accuracy | Class A |
| Type | PT100 |
| Sensor Connection Wiring | 3 Wire |
| Material Grade | SS316 |
| LENGTH- | 300MM |
| MAKE | THERMO SENSORS |
| DIA- | 6MM |
| CONNECTION- | 1/2"BSP(M) |
Product Details:
| Class | Class 1 |
| Temperature Range | -210 DegreeC to +1200 DegreeC |
| Probe Material | Inconel |
| Cable Length | 3.5 m |
| Probe Diameter | 1MM TO 6MM |
| MAKE | THERMO SENSORS |
We are engaged in offering a quality tested array of Standard Probes Sensors. The Standard Probes Sensors we offer is widely demanded by the clients for their availability in various sizes and specifications. Safe to use these products are commended for their durability and safe use.
Features:
Low maintenance
Highly demanded
Highly efficient
Product Details:
| Type | PT100 |
| Sensor Connection Wiring | 3 Wire |
| Temperature Range | -200 TO 400 Degree C |
| Cable Length | 3 m |
| Sheath length | 200MM |
| Diameter | 6MM |
| MAKE | THERMO SENSORS |
Features:
Product Details:
| Type | PT100 |
| Temperature Range | -200 to 600 deg C |
| Accuracy | Class A |
| Sheath Construction | Conventional |
| Process Connection | Fixed or adjustable |
| Head Type | Weather proof |
Features:
Sheath MOC : SS 304 / 316 (According to process).
Accuracy : Class A,1 / 3B, B, 2B.
Sheath Construction : Conventional / MI
Sheath length/OD : According to the application.
Process Connection : Fixed or adjustable, BSP, NPT or as per mounting, MOC:SS (304, 316).
Head Type : Weather proof / Flame Proof
Product Details:
| Temperature Range | -10 to +60 Deg C |
| Material | Brass |
| Accuracy | 1%-10% |
| Ip Rating | IP65 |
| Output | Analog Sensor |
| Usage | Temperature Sensor |
Product Details:
| Temperature Range | -200 to 600 deg C |
| Accuracy | Class B |
| Sensor Connection Wiring | 3 Wire |
| Application | Industrial |
| Termination Type | Terminal Head Assembly |
| Process Connection Type | Flanged |
| Probe Material | Stainless Steel |
| Cable Length | 3 m |
| Insulation | PTFE Insulated |
| Thermal Response Time | Less than 80s |
We supply supreme quality RTD PT100 Sensor with the most superior standards and performance available.
Features:
Product Details:
| Type | PT100 |
| Temperature Range | -40 to 450 deg C |
| Accuracy | Class A |
| Sensor Connection Wiring | 3 Wire |
| Application | Food Industry |
| Termination Type | Terminal Head Assembly |
| Process Connection Type | Adjustable Compression fitting |
| Probe Material | Stainless Steel |
| Probe Diameter | 0.5 - 8 mm |
| Probe Length | 0 - 150 mm |
| Cable Length | 2 m |
The RTD (more commonly known as PT100) is one of the most used temperature sensors in industry. It is known to be the most accurate and repeatable sensor for low to medium temperatures (-300 to + 600 ° F.)
RTD stands for Resistance Temperature Device. Quite simply, the sensor comprises of a resistor that changes value with temperature. The most common RTD by far is the PT100 385. This element measures 100 Ohms @ 0 degrees C (32 °F) and 138.5 Ohms @ 100 °C (212.0 °F).
One of the greatest challenges for instrument engineers is dealing with the relatively low resistance of the device. This is because any stray resistance (in particular lead resistance) of RTD assembly can add a significant error to the measured resistance.
To combat this, different lead compensation schemes were invented and have come to be known as 2 wire, 3 wire and 4 wire.
Product Details:
| Type | PT100 |
| Temperature Range | -50 to 250 deg C |
| Accuracy | Class B |
| Sensor Connection Wiring | 3 Wire |
| Termination Type | Terminal Head Assembly |
| Sensor Configuration | Simplex |
| Sheath length | 200MM |
| MAKE | THERMO SENSORS |
| DIA- | 6MM |
Product Details:
| Type | PT100 |
| Accuracy | Class A |
| Sensor Connection Wiring | 3 Wire |
| Cable Length | 2 m |
| dia- | 6mm |
| MAKE | THERMO SENSORS |
| connection- | 1/2"bsp(m) |
| length- | 150mm |
Thermo Sensors, incepted its operations in the year 2006, as a manufacturer, supplier and trader of this impeccable range of Metal Thermocouple, RTD and Temperature Sensors, Thermocouples Probes, Resistance Temperature Detectors, Thermocouples Compensating Cables, RTD Cables, Industrials Heaters and many more, make up this impeccable and diverse range. Manufactured following the set industry norms and guidelines, utilizing high grade raw materials and advanced technology, the offered product is known to have a superior performance, capacity, strength and a longer functional life. In addition to this, the offered range is marked at a market leading rate.
The state-of-the-art infrastructural facility laced with all the equipment and machinery, help us in the attainment of several of firm’s predefined goals and objectives of the firm. In order to attain greater heights and maximize our market reach, we keep upgrading the facility on a highly regular basis. To manage the firm’s operations, with utmost efficiency and effectiveness, the facility has been divided into several units. These units, highly operational in nature, work in the most dedicated manner, to maximize the firm’s production capacity. In addition to this, our ethical working habits have helped us generate a huge client base.
Product Details:
| Brand | Thermo Sensors |
| Operating Temperature Range | -20 to 60 Deg C |
| Accuracy | +/-1% |
| Material | Steel |
| Usage/Application | Temperature Measurement |
| Operation | Easy to operate |
| Theory | Resistance Temperature Sensor |
Product Details:
| Material | Platinum |
| Type | RTD Sensor |
| Model | High-Temperature Transmitter Sensor |
| Temperature Range (Degree Celsius) | 30...+400 C |
| Termination | 4 to 20 mA |
| Connection Head | 40 (Minus) 100 C ( 85 C with transmitter) |
Product Details:
| Type | Thermocouple Sensor |
| Operating temperature | 60 Degree C |
| Accuracy | +- (0.15+0.002|t|) |
| Theory | Resistance Thermometer |
| Usage | Industrial |
| Temperature Range | -50deg C - 250deg C |
| Country of Origin | Made in India |
Product Details:
| Type | PT100 |
| Temperature Range | -50 to 250 deg C |
| Accuracy | Class A |
| Sensor Connection Wiring | 3 Wire |
| Application | Injection Moulding |
| Termination Type | Lead Wire |
| Probe Material | Stainless Steel |
| Cable Length | 2 m |