Jaitala, Nagpur, Maharashtra
GST No. 27AWVPS5974N1Z3
Call 08047631937 91% Response Rate
Send Enquiry
Voltage | 230V |
Heater Material | Ceramic |
Power | 230v |
DIA- | 35MM TO 48MM |
MAKE | THERMO SENSORS |
TYPE- | BOBBIN HEATER |
Country of Origin | Made in India |
Ceramic bobbin heaters are a unique steatite heating element that can be installed freely for direct heating of air. In the manufacturing of bobbin heaters we use ceramic segments that we build together to desired length. The segments have recesses where we place open heating coils. Through this design the heating coils will be protected from contact with the chassis and will retain good electrical insulation.ceramic bobbin heaters are also used for indirect heating of liquids, air and gases stuck into radiation tubes. These tubes are placed into the medium and the bobbin heater into the tube. The ceramic heater can now easily be changed without emptying or opening the tank. The tubes are provided with flange or thread for easy mounting and also with built in sensors, thermostats or limiters in custom connection boxes.
View Complete details
Types | Immersion Heaters |
Heater Material | Ceramic |
Power | 230V |
DIA | 35MM TO 48MM |
MAKE | THERMO SENSORS |
LENGTH | 300MM |
Features:
Sheath Temperature | 500 degree C Max |
---|---|
Heating Element | NiCr 80:20 |
Voltage Rating | 12 V to 440 V (Single / Dual / Three Phase) |
Diameter Options | 25mm, 32mm, 34mm, 38mm, 42mm, 45mm, 50mm, 65mm, 75mm |
Power Rating | 500 W & Above |
Power Tolerance | +- 10 percent |
Resistance | +- 5 percent |
Minimum Length | 50mm |
Lead Connections | Screw Post/Lead Wires |
Lead Terminals Depending on the insulator Dia. | 5/32" or 3/16" or 1/4" Brass Nut and Washer |
Wiring Options | 2 Terminals-for 1 phase @ 230 V & 2 phase @ 440 v/ 415 V, 3 Terminals - for 3 phase @ 440 V / 415 V |
Insulation Material | High Temp Steatite Insulators |
Centre Rod Depending on the Insulator Dia | SS / MS of 5/32" or 3/16" or 1/4" |
View Complete details