Thermo Sensors

• The 3 1/2 Digit Earth Resistance Tester with RSR Technology -0.01 Ohms to 1999 Ohms
• Earth Voltage Measurement up tp 200V AC

This instrument uses an electrode to pass a voltage, and then measure the current, which depends on the resistance value  changing with the temperature of the sample. The current value is shown as temperature reading. This instrument uses K-type thermocouple.  

Features:-
* High precision thermometer with 19999 counts.
* K-type thermocouple.
* Data storage and recall.
* High and low temperature alarms.
* C to F convertible.
* Auto power off.

• Selectable sensor Input (T/C & RTD)
• Control Action : T.P. Control / ON-OFF
• Programmable Input Signal Conditioning (Digital Filter & Zero Offset)
• Programmable Lower and Higher Setpoint Limit
• Program lock function (To prevent unauthorized tampering)
• Alarm Acknowledge function
• Alarm Inhibit function
• Soak timer function
• Settable soak time delay
• Time Delay for Compressor
• Universal supply voltage ranges from 90 to 270 VAC
• Supply 24 VDC Available on Request 

• Two Line Display
• Time and Date Display Function
• Max/Min Memory
• Button Function: 4 Buttons 1) MODE, 2) ADI, 3)°C/°F, 4) MAX/MIN
•  C and  F Selectable
• Low Battery Indication 

Display 4-digital lcd display

Minimum display unit 0. 1mm

Working frequency 5 mhz

Measuring range 1. 2 to 225. 0mm(steel)

Minimum limit for tube measuring 20 * 3mm(steel)

Accuracy +- (1% h 0. 1) mm, h denotes the measured thickness.

Sound velocity range 1000 to 9999 m/s.

Measuring sound velocity with a given thickness

Measuring range 1000 to 9999 m/s.

when the given thickness over 20mm, the accuracyis +- 1% , when the given thickness less than 20 mm, the accuracy is +-5%

Operation temperature 0c to 40 c

Power supply 3 * 1. 5v aaa alkaline batteries

Operation current normal operation current

50ma with backlight turn on current 120 ma stand by current 20 ua 

• Big Display Thermo
• Hygrometer with Clock large 2 line LCD display.
• Time / Temp / Humidity indicate. 
• Temp. Reading for o F & oC. 
• MAX and MIN Temperature and Humidity Memory. 
• Calendar with Alarm Clock. 

• Selectable sensor input (T/C & RTD)
• Programmable control action PID control/ ON-OFF
• Programmable Input Signal Conditioning (Digital Filter & Zero Offset)
• Programmable Lower and Higher Setpoint Limit
• Program lock function (To prevent unauthorized tampering)
• Selectable Control Output (Relay/ SSR Drive)
• Overshoot Control Protection
• Single Step Ramp
• Time Delay for Compressor
• Available in 4 different sizes (48×48, 48×96, 72×72, 96×96)
• Universal supply voltage ranges from 90 to 270 VAC
• 24VDC Available on Request 

• Selectable sensor input (T/C & RTD)
• Programmable control action PID control/ ON-OFF
• Programmable Input Signal Conditioning (Digital Filter & Zero Offset)
• Programmable Lower and Higher Setpoint Limit
• Program lock function (To prevent unauthorized tampering)
• Selectable Control Output (Relay/ SSR Drive)
• Selectable Alarm/ Soak Timer Output (Except 48×48 size)
• Alarm Acknowledge & Inhibit function
• Programmable soak timer with 4 Start modes
• Battery Backup for Soak Timer
• Timer Hold Strategy
• Settable soak time delay
• Overshoot Control Protection
• Single Step Ramp Soak
• Time Delay for Compressor
• Available in 5 different sizes (48×48, 48×96, 72×72, 96×48, 96×96)
• Universal supply voltage ranges from 90 to 270 VAC
• Supply 24VDC Available on Request 

• Application:
  
  • Used for measuring periodic motion, to check the imbalance and deflecting of moving machinery.
  • Is specifically designed for present measuring various mechanical vibrations. So as to provide the data for the quality control, run time and equipment upkeep.
  • Use the high performance acceleration meter, realize the repetitiveness and accurate measurement.
  • It has the function of testing axle bearing situation.

• Back Light and Data Hold
• DCV:200m/2/20/200V±0.5%, 1000V±0.8%
• ACV:200mV±1.2%,2/20/200V±1.0%,700V±1.2%
• DCA2m/20mA±1.0%,200mA±1.5%,10A±3.0%
• ACA2m/20mA±1.2%,200mA±2.0%,10A±3.0%
• Resistance:200/2K/20K/200K/2M/20M Ohm ±1.0%,200M Ohm ±5.0%
• Capacitance:2n/20n/200n/2u/20uF±4.0%
• Temperature:-20 C-1000C ±3.0%
• Frequency:20KHz ±1.5%
• Audible Continuity
• Diode Test
• Power:6F22(9V)X1PC
• Mastech MS8200G Digital Multimeter offers the ability to measure DC and AC current, DC and AC voltage.

• True-RMS digital multimeter with the features professional technicians prefer
• Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording
• Measures AC and DC voltage to 1000 V
• Delivers accurate True-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
• Safety rated CAT III 1000 V, CAT IV 600 V 

• Focus on application
• Stainless steel cooling and protecting housing up to 320°C
• Fast target measurement
• Focus laser marks field-of-view
• Very high linearization accuracy (0.02K)
• User interface software for complete programming and measurement
• Fields-of-view from 0.4 mm at low temperatures (> 200 °C) allow high optical resolutions

• Temperature Measurement of:
• Metals
• Metal oxid
• Semiconductors
• Glass
• Graphite
• Silicium

Mextech CM801E Coating Thickness Meter has an NF function measure the thickness of non-magnetic coatings on non-magnetic metals. It is used on a powder, nodizing, enamel, varnish, paint, plastic coatings, etc. applied to aluminum, brass, non-magnetic stainless steel, etc. This Thickness Meter plays an important role in product quality, process control and cost control.

Applications: body paint thickness, uniformity on pre-owned cars, revealing repainted spots and all the pain related industries. 

• Accuracy: 1RPM up to 5,000 RPM and 0.05% of the reading above 5,000 RPM.
• Resolution: 0.1RPM up to 5,999 RPM and 1RPM at and above 6,000RPM
• Micro-controller based design with world class Indian software
• Non-contact sensing through reflected light beam on reflective sticker
• LCD display, Input sensing indication through LED, Memory facility to retain measured value 

DT-2235B is An electronic 5-digit LCD contact tachometer which also functions as a speed indicator (selectable) Direct reading rpm, emory - recall of last reading, max., min, tandard, Accessory , User''s Manual Gift box, Portable Paper boxes rubber contacts round. Detector type contact.

Feature:

• Measuring Range: 0.5 to 19,999 RPM, Resolution: 0.1 RPM for 1,000 RPM, 1 RPM for ???1,000 RPM
• Surface Speed (m/min.): 0.05 to 1,999.9 m/min, Resolution: 0.01 m/mim. for 100 m/min, 0.1 m/min. for 100 m/min
• Surface Speed (ft/min.): 0.2 to 6,560 ft/min, Resolution: 0.1 ft/min. for 1000 ft/min, 1 ft/min. for 1,000 ft/min, Accuracy: ± ( 0.05% + 1 digit ).
• Operating Temperature: 0??? to 50 ???; Sampling Time: 1 second ( 6 RPM ). Power Supply: 1.5 V AA Battery; Memory: Last value, Max. value, Min. value. 

Temperature scale: ℃ or ℉ user-selective.

Resolution: 1℃ or 1℉ (or 0.1℃ or 0.1℉)

User-Selectable

Inputs: One k-type thermocouple

Measurement range: -50 ~ 1300℃, (-59 ~ 2000℉)

Meter operating range: For using at 0℃ ~ 50℃ environment (32 ~ 122℉)

Accuracy: (18~28℃ ambient) ¡ó(0.3%rdg + 1℃) -50 ~ 1000℃ ¡ó(0.5%rdg + 1℃) 1000 ~ 1300℃ ¡ó(0.3%rdg + 2℉) -58 ~ 2000℃

Temperature coefficient:

0.1 times the applicable accuracy specification per ℃ from 0℃ to 18℃ to 50℃

Error offset: Errors contributed by one particular thermocouple may be practically eliminated, over a limited measurement range, using a recessed front panel offset adjust on the meter and an accurate temperature standard when making the adjustment. Although making the adjustment may increase measurement errors for using different thermocouples

Maximum input: 60Vdc or 24V rms ac between the input pins or any input and ground. 

• Operating Principle: Magnetic Induction (F)
• Measuring Range:0~1000µm / 0~40mil
• Resolution:
  • 0.1µm (0~99.9µm)
  • 1µm (over 100µm)
• Accuracy: ±1~3%n or ±2.5µm (whichever is greater)
• Min. measuring area: 6mm
• Min. sample thickness: 0.3mm
• Metric/ imperial: convertible
• Auto power off
• Automatic Calibration (when no other metal substrate near the probe sensor upon switching on)
• Display: 4 digits, 10mm LCD.
• Operating conditions:
  • Temperature 0~50°C (or 32~122 in °F)
  • Humidity <80%
• Battery indicator: Low Battery Indicator
• Power supply: 4 x AA 1.5V battery
• Dimensions (main unit): 67 x 168 x 31mm
• Weight:
  • Main Unit: 155g (battery excluded)
  • Whole Packaging: 690g (battery excluded)

• 1 x Digital Coating Thickness Gauge
• 1 x F type Probe with 1M cable
• 1 x Iron Substrate Block
• 4 x Calibration Foil
• 1 x Plastic Pouch
• 1 x Carrying case
• English Instruction manual
• Standard Factory Package
•