Thermo Sensors

• Highly reliable
• Efficient working
• Low maintenance

• Sturdiness
• Water and heat resistant
• Easy to install

Features:

Sheath MOC : SS 304 / 316 (According to process).

Accuracy : Class A,1 / 3B, B, 2B.

Sheath Construction : Conventional / MI

Sheath length/OD : According to the application.

Process Connection : Fixed or adjustable, BSP, NPT or as per mounting, MOC:SS (304, 316).

Head Type : Weather proof / Flame Proof

• Efficient working
• Low maintenance
• Highly demanded

Simplex (Single element) stator winding RTDs The Stator winding temperature detector (RTD) are used to measure winding temperature of large Motors, Generators etc. These sensor are sandwiched between the windings of Motors/Generators. Unlike on/off devices, It allows continuous measurement of winding temperature. Normally six sensors are recommended for each motor, Two per Phase. This RTD are generally flat type in construction and are available in various sizes.

Specification:

Type : PT 100(100 ohm at 0 degC)

Model: TSRE series Body

Material: Fibre Glass epoxy

Temperature Class: Class F(Temperature limit:155 DegC) or Class H(Temperature limit:180 DegC)

Calibration Standard: IEC 60751 Or DIN 43760

Temperature coefficient(TCR):0.003850

Accuracy: Class A/B/2B

Sensing current: 10mA maximum

Dielectric strength: 3 KV/50Hz for 1minute between leads & surface of Glass epoxy body (Increased dielectric strength up to 5 KV/ 50Hz for 1 minute upon request.)

We are engaged in offering a quality tested array of Standard Probes Sensors. The Standard Probes Sensors we offer is widely demanded by the clients for their availability in various sizes and specifications. Safe to use these products are commended for their durability and safe use.
Features:
Low maintenance
Highly demanded
Highly efficient

Features:

• Sheath MOC SS 304 / 316 (According to process)
• Accuracy Class A, 1/3B, B, 2B
• Sheath Construction Conventional / MI.
• Sheath length OD According to the application.
• Process Connection Fixed or adjustable, BSP, NPT or as per mounting, MOC SS (304, 316).
• Cable Type 2/3/4/6/8-Core as per requirement

We supply supreme quality RTD PT100 Sensor with the most superior standards and performance available.

Features:

• Withstands the very hot and abrasive conditions
• Optimum performance
• Long-lasting service

• Standard element: pt 100
• Simplex or duplex (2 wires or 3 wires) calibration: din 43760, bs 1904, jis c 1604 gr
• Sheath & mounting: as per drawing
• Cable: ptfe - or - fibreglass / ss braided with ptfe insulated conductors

The RTD (more commonly known as PT100) is one of the most used temperature sensors in industry. It is known to be the most accurate and repeatable sensor for low to medium temperatures (-300 to + 600 ° F.)

RTD stands for Resistance Temperature Device. Quite simply, the sensor comprises of a resistor that changes value with temperature. The most common RTD by far is the PT100 385. This element measures 100 Ohms @ 0 degrees C (32 °F) and 138.5 Ohms @ 100 °C (212.0 °F).

One of the greatest challenges for instrument engineers is dealing with the relatively low resistance of the device. This is because any stray resistance (in particular lead resistance) of RTD assembly can add a significant error to the measured resistance.

To combat this, different lead compensation schemes were invented and have come to be known as 2 wire, 3 wire and 4 wire.

Thermo Sensors, incepted its operations in the year 2006, as a manufacturer, supplier and trader of this impeccable range of Metal Thermocouple, RTD and Temperature Sensors, Thermocouples Probes, Resistance Temperature Detectors, Thermocouples Compensating Cables, RTD Cables, Industrials Heaters and many more, make up this impeccable and diverse range. Manufactured following the set industry norms and guidelines, utilizing high grade raw materials and advanced technology, the offered product is known to have a superior performance, capacity, strength and a longer functional life. In addition to this, the offered range is marked at a market leading rate.

The state-of-the-art infrastructural facility laced with all the equipment and machinery, help us in the attainment of several of firm’s predefined goals and objectives of the firm. In order to attain greater heights and maximize our market reach, we keep upgrading the facility on a highly regular basis. To manage the firm’s operations, with utmost efficiency and effectiveness, the facility has been divided into several units. These units, highly operational in nature, work in the most dedicated manner, to maximize the firm’s production capacity. In addition to this, our ethical working habits have helped us generate a huge client base.