Product Details:
Model No. | E5CB |
Size | 48 x 48 mm |
Control Type | PID/On-Off |
Input Type | RTD, Voltage (mV), Thermocouple |
Brand | Omron |
Temperature Range | -10 to 50 Deg C |
Display Type | 4 Digit/7 Segment |
Voltage | 24 VAC/DC |
Frequency | 50 - 60 Hz |
Product Details:
Model No. | FV101 Series |
Size | 1/4 DIN |
Control Type | Proportional/On-Off |
Brand | Omega |
Display Type | 4 Digit/7 Segment |
Voltage | 24 VAC/DC |
Operating Ambient | -10deg C to 60deg C |
Accuracy | 0.1%FS |
Temperature Display | 0.1 or 0.01 |
SPECIFICATIONS
The FV101 Series comprises in-line flow meters that use the vortex shedding measuring principle. The fluid strikes a bluff body, imparting alternating vortices downstream of the bluff. This creates a pressure on a sensor body containing a piezoelectric crystal. The frequency of the sensor is proportional to the velocity of the fluid and is amplified and converted to a 4 to 20 mA output signal. Vortex technology yields a meter with no moving parts to hang up or wear. The meter has a bright 7.62 mm (0.3") high LED display of flow in either liters or gallons. The FV101 Series can be used with non-viscous, clean, or dirty waterlike liquids that are compatible with brass, PVDF, and FKM. Measured fluids should not contain long fibers or a high level of abrasive solids. These meters are ideal for cooling loops using water or 50% glycols, and for water-soluble machine coolant (up to 10%). These applications are found in most process industries, including rubber, steel, fabrication, manufacturing, refining, paper, chemical, food, petrochemical, and power. Do not use on flammable liquids or on gases such as air.
Flow
Accuracy: ±2% FS
Repeatability: ±0.25% FS
Alarm Deadband: 5% FS
Response Time: User selectable from 0.9 to 7.5 seconds
Max Flow: Over range occasionally up to 125% of capacity
Temperature
Accuracy: ±1% FS
Response Time: 450mS time constant
Alarm Deadband: 2%
Display: 3-digit, 7.62 mm (0.3") high numeric LED that flashes below setpoint
Maximum Operating Pressure:
2" and Smaller: 20 bar (300 psig)
3 and 4": 13 bar (200 psig)
Operating Temperature: 2 to 66°C (35 to 150°F)
Enclosure Rating: IP65; Type 1, 3, 4, 12, and 13
Analog Output: 4 to 20 mA (600 Ω @ 24 Vdc)
Electrical Connection:
FV100 Units (Flow Only): 5-pin micro male connector
FV100-T Units (Flow/Temperature): 8-pin male micro connector
Alarm Output: SPST SSR, NO or NC operation, selectable; dual alarms for flow/temperature units
FV101 and 102:250 mA @ 30 Vdc up to 66°C (150°F)
FV103 thru 108:125 mA @ 30 Vdc up to 66°C (150°F); reduced current rating at higher temperatures
Power: 10 to 30 Vdc @ 80 mA
Wetted Parts: Brass, PVDF and FKM seals; 316 SS bodies available for special order on 1/4 to 1/2" sizes, contact Flow Engineering for details
Installation: 10 pipe diameters upstream and 5 downstream recommended
Product Details:
Brand | Dixell |
Model No. | PRIME CX E- CLASS |
Size | 1/2 DIN |
Control Type | On-Off |
Temperature Range | 0 to 60 Deg C |
Mounting Type | DIN Rail |
Frequency | 50 - 60 Hz |
Accuracy | 0.2% |
Product Details:
Brand | Fuji |
Model No. | PXE4-2 |
Size | 48 x 48 mm |
Control Type | PID/On-Off |
Input Type | Thermocouple, RTD |
Control output Type | Relay/SSR |
Temperature Range | -10 to 50 Deg C |
Accuracy | (+/-0.5% of indicated value or 1 Degree C, whichever is larger) +/-1 digit +/- 1 Degree C |
Display Type | 4 Digit/7 Segment |
Mounting Type | Panel |
Voltage | 100-240 VAC |
Frequency | 50/60 Hz |
Product Details:
Brand | Fuji |
Model No. | PXF Series |
Size | 48 x 48 mm |
Control Type | PID/On-Off |
Input Type | RTD, Thermocouple, Voltage (mV) |
Accuracy | +-0.2% |
Temperature Range | 0 to 50 Deg C |
Display Type | 4 Digit/7 Segment |
Product Details:
Model No. | DTA Series |
Brand | Delta |
Size | 48 x 48 mm |
Control Type | PID/On-Off |
Input Type | RTD, Thermocouple |
Accuracy | 1% |
Display Type | 4 Digit/7 Segment |
Frequency | 50 - 60 Hz |
Temperature Range | 0 - 50 Deg C |
Backed by or highly skilled and experienced professionals we are engaged in offering Temperature Controller. Used in various industries to control the temperature & heat, the offered product is checked various quantities provisions for dispatching a flawless range. This product is well manufactured with topmost grade material in tandem with set market norms. The offered product is provided in numerous specifications as per the need of customers.
Features:
Product Details:
Model No. | CN730 |
Size | 48 x 48 mm |
Brand | Omega |
Accuracy | +-0.25% span |
Temperature Range | 0 to 50 DegreeC |
Display Type | 4 Digit/7 Segment |
Voltage | 110-230 VAC |
Product Details:
Brand | Sub Zero |
Model No. | SZ-7510 |
Size | 1/2 DIN |
Control Type | On-Off |
Mounting Type | Panel |
Voltage | 24 VAC/DC |
Accuracy | +/- 1 Deg C |
Product Details:
Brand | Honeywell |
Model No. | DC1040 |
Size | 1/4 DIN |
Control Type | PID/On-Off |
Input Type | Current (mA), Thermocouple, RTD |
Temperature Range | 0 to 50 Deg C |
Accuracy | +-0.2%FS |
Display Type | 4 Digit/7 Segment |
Mounting Type | Panel |
Frequency | 50 - 60 Hz |
Product Details:
Brand | Fuji |
Model No. | PXF4 |
Size | 48 x 48 mm |
Control Type | PID/On-Off |
Input Type | Thermocouple, RTD, Voltage (mV) |
Control output Type | Analog (mA/mV), Relay/SSR |
Accuracy | +-5%FS |
Display Type | 4 Digit/7 Segment |
Product Details:
Display Type | 4 Digit/7 Segment |
Mounting Type | Panel |
Brand | Carel |
Control Type | PID/On-Off |
Model No. | c.pCO |
Frequency | 50 - 60 Hz |
Voltage | 90-270 VAC/DC |
Accuracy | +/- 1 Deg C |
Product Details:
Size | 48 x 48 mm |
Temperature Range | -40 to 120 Deg C |
Brand | Thermo Sensor |
Display Type | 3 Digit/7 Segment |
Voltage | 24 VAC/DC |
Accuracy | 0.1 % |
Owing to the presence of our expert engineers, we have been able to manufacture, trade and supply of a supreme quality PID Temperature Controller. This temperature controller is manufactured with quality approved material with the help of the advance techniques. The offered temperature controller is delivered to our customers only after its proper examination on various parameters. Along with that, our customers can avail this temperature controller from us at reasonable prices.
Features:
Specifications:
Product Details:
Size | 48 x 48 mm |
Control Type | On-Off |
Brand | Thermo Sensor |
Display Type | 4 Digit/7 Segment |
Mounting Type | Panel |
Voltage | 90-270 VAC/DC |
Accuracy | 0.2% |
Product Details:
Size | 48 x 48 mm |
Control Type | On-Off |
Accuracy | +- 0.1% FS |
Display Type | 3 Digit/7 Segment |
Voltage | 24 VAC/DC |
Temperature Range | 15deg C ~ 28deg C |
Cost-effective temperature controller. It accepts J-type (Iron/Constantan) and K-type (Chromel/Alumel) thermocouples as well as Pt 100 RTD inputs. A large LED dual-display on the front of the process controller shows the difference in values of the setpoint and process value while 2 additional LEDs indicate the status of each of the two relays. Operators easily program up to 2 setpoints via membrane keys on the front of EC96. With an error of only 0.1% of the full-scale, this is a process controller of superior accuracy. Typically, readings have a maximum error of ± 1 °C. The controller has 2 electromagnetic relays that trigger heating or cooling. EC96 is conventionally an ON-OFF controller that outputs a discrete signal, but can also be used in Time-Proportioning Mode which turns the actuator on and off for periods proportional to the desired control effort, to emulate a continuous actuator that can generate a control effort between 0 and 100%. EC96 features Radix's proprietary sensor-break indication technology.
Specification:
Product Details:
Brand | Thermo Sensor |
Controller Function Type | On-Off, On-Off |
Display Type | 4 Digit/7 Segment |
Voltage | 24 VAC/DC |
Accuracy | +- 0.5%F.S |
Specifications:
2 Universal input: 8 thermocouple types (B, E, J, K, N, R, S, T), Pt100 and milli-ampere signals
Set Points 5: Four for relays,One for 4 - 20 mA
Auto-tuning: from cold start or at set-point
RS485/MODBUS RTU, isolated
85~265 VAC SMPS, 24 VAC, 24 VDC
Selection: Auto / Manual
2 x Isolated 0/4-20 mA or 0-10 V DC for control or retransmission
PID, Proportional, ON-OFF control
Scalable Remote Setpoint
PID versions:
Standard – relay/analog control output
VMD open + close relay outputs
Product Details:
Model No. | TSDIN |
Control Type | On-Off |
Control output Type | Relay/SSR, Analog (mA/mV) |
Display Type | 3 Digit/7 Segment |
Mounting Type | DIN Rail |
Voltage | 24 VAC/DC |
Brand | Dwyer |
Product Details:
Brand | Omron |
Model No. | E5GC |
Size | 48 x 48 mm |
Control Type | PID/On-Off |
Control output Type | Relay/SSR, Analog (mA/mV) |
Temperature Range | 0 to 50 Deg C |
Display Type | 4 Digit/7 Segment |
Product Details:
Type | Automatic |
Range | 3-5m |
Output Type | Digital |
Output | 4~20mA |
Accuracy | +- 0.3%F.S |
Product Details:
Model No. | PT-100 |
Size | 48 x 48 mm |
Control Type | PID/On-Off |
Control output Type | Relay/SSR, Analog (mA/mV) |
Temperature Range | 0 to 50 Deg C |
Display Type | 4 Digit/7 Segment |
Voltage | 24 VAC/DC |
Frequency | 50 - 60 Hz |
Accuracy | +- 0.5%F.S |
Type: Digital
Power: 100 to 240 VAC
Input RTD: PT-100 2W/3W (-99.9 deg C to 400 deg C) Selectable
Dimensions: 96 x 96 x 75 mm (H x W x D)
Resolution: 1 deg C / 0.1 deg C (For Range Less than 400 deg C)
Power Supply: 90-270V AC/DC,SMPS
Lower Display: Green,4-Digit,0.4 inch
Panel Cut Out: 92 x 92 mm
Upper Display: Red,4-Digit,0.56 inch
Control Output SSR: 12V DC +/-2V
Input Thermocouple: J (0 to 600 deg C) / K (0 to 1200 deg C)
Indicating Accuracy: +/- 1% of FSD
Control Output Relay: 1 Relay,230V AC,5A (1C/O)
Control Output Buzzer: 12V DC +/-2V
Product Details:
Size | 1/8 DIN |
Control Type | PID/On-Off |
Temperature Range | 0 to 50 Deg C |
Brand | Danfoss |
Accuracy | 0.1%FS |
Additional Information:
Product Details:
Brand | Omega |
Operating Temperature | -30deg C ~70deg C |
Relative Humidity | Less than 90% |
Differential Pressure | 0~3.5MPa |
Product Details:
Brand | Tubular Heaters |
Accuracy | +-1deg C |
Theory | Temperature Controller |
Temperature Range | -50deg C~99deg C |
3.9/5
Reviewed by 69 Users
Most Relevant Reviews